Tunable White LED Spot | 60° Ra90 2400-4000K 24V 6W+6W

Deep Tunable White LED Spots  2400-4000K  | 6W+6W Wattage Balance

Feature

Human-perceived natural white tones are aligned along a distinctively curved trajectory in the chromaticity space – the Planckian Locus (represented by the black curve in the diagram). TILLUME tunable color temperature (CCT) spot module (2400K-4000K) address the inherent challenge of mixed-light color deviation through a narrowed CCT range. 

This optimized spectral tuning significantly reduces mid-range chromatic aberrations that typically manifest as unnatural magenta/pink tints in conventional wide-range CCT systems. By confining the adjustment to 2400K-4000K, the blended light output adheres more closely to the Planckian Locus, effectively mitigating color distortion and delivering perceptually natural illumination that aligns with human visual preferences."

Technical Data

Operating voltage: 24V DC
Max. current consumption: 0.25A
Max. power consumption: 6 W
Luminous flux: approx. 540 lm (@4000K)
Color temperature: 2400K - 4000K
Color rendering index CRI @2400K/4000K: >90 Ra
Color rendering index CRI @4000K: >95 Ra
Power 6W (6W WW+ 6W CW)
Beam angle: 60 degrees
Dimmable: Yes, up to 1% with the appropriate PWM dimmers
Chip type: COB
lifetime: >50,000 hours
Operating temperature: -25 degrees Celsius to +60 degrees Celsius
Storage temperature: -40 degrees Celsius to +80 degrees Celsius
Dimensions: 50 mm with a diameter of 49 mm
Connecting cable: 3 wires and 150 mm length

Operated With KNX System

Controller by MDT TECHNOLOGIES

Avaliable for the item as below
AKD-0424R.02 
AKD-0424R2.02
AKD-0424V.02
AKD-0324V.02
AKD-0224V.02

Click on the spectrum image to view the specification sheet

Warm Tips: The spot must work with actuater which have wattage balance function. For KNX tunable wihte actuater, you should go to ETS software to configure output type. Take MDT AKD-0424R.02. actuator as a example, you need to choose constant brightness mode.

Operated With DALI System

Controller by LUNATONE

Avaliable for the item as below
DALI LED Power Supply(DT8):
89453849-CWW-24V
DALI LED Dimmer (CV, DT8): 
89453836(4A)
86458673(8A)
89453838(10A)
89453841(16A)
89453841-HS(16A DIN Rail)

Warm tips: Usually you could install DALI DT8 actuater directly.

Recommend installation frames and surface-mounted housings:

Surface Mounted Luminaries Ceiling

Recessed Luminaries Ceiling

Pendant Luminaries